Capacitive Sensors: Custom Probes
Custom is Standard
Over half of our capacitive sensor orders are modified in some way; from simple custom calibration ranges to complete probe designs for a specific application, and everywhere in between.
Making It Work For You
In your application, getting a probe into the right place with the right sensing characteristics may require probe design changes. We’ve done this many times using our CUSTomer-Oriented Manufacturing (CUSTOM) system – a streamlined process to create custom capacitive sensors as quickly as possible.
Use Existing Custom Designs
If an existing custom probe design will work for you, you can save some or all of the time and cost of designing and testing a new custom probe. Maybe we already have a design for your need.
Some existing custom capacitive sensors are shown in the table below. The designs here will usually work with the CPL190/290, CPL230 and CPA100 drivers. Contact one of our Application Engineers or local representatives for help in getting the right sensor for your application.
Existing Custom Capacitive Sensor Probes
Inventory Probe
- Measurement Ranges: 1 inch
- Notes: Very rugged probe for industrial use such as detecting nonconductive polymer thickness during production
3/8″ 45°
- Measurement Ranges: 800 µm 3 mm
- Notes: Frequently used in vacuum.
5mm 45°
- Measurement Ranges: 100 µm
- Notes: Frequently used in vacuum.
R3-F
- Measurement Ranges: 10, 50, 80 µm
- Notes: 0.5 mm sensing area Ø For measurements near adjacent perpendicular surfaces.
N2-F
- Measurement Ranges: 10, 50, 80 µm
- Notes: 0.5 mm sensing area Ø For measurements near adjacent perpendicular surfaces.
C9-K
- Measurement Ranges: 1 mm, 1.5 mm, 3 mm
- Notes: 9.6 mm sensing area Ø Designed with vent holes for vacuum. Threaded holes near cable exit for grounding lugs/mounting.
C26-H
- Measurement Ranges: 2.5 mm, 6.0 mm
- Notes: 19 mm sensing area Ø Has been used in cryogenic applications
C22-H
- Measurement Ranges: 2.5 mm, 6.0 mm
- Notes: 19 mm sensing area Ø
C31-T
- Measurement Ranges: 2 mm, 3.2 mm, 5 mm
- Notes: 13.4 mm sensing area Ø
R9-Q
- Notes: 23 x 37 mm sensing area
Designed to monitor amount of coatings such as water-based adhesives or glues during the application process. Could work well with any nonconductive material. Can be used for large range (> 20 mm) displacement measurement.
PCB Sensors
- Notes: Complete OEM custom sensor systems may require many sensors in a small space.