Technical Library

Label Sensors and Web Splices

Label Sensors TechNote LT04-0010

Copyright © 2007 Lion Precision. www.lionprecision.com

Summary

Label sensors are affected by splices. Different sensors are affected differently depending on the technology within the sensor. This TechNote gives details of the sensor's operation when encountering a splice. Includes output waveforms.

Label Sensors and Web Splices

LRD2100, LRD3100, LRD4100

Butt splices have no effect on sensor operation when:
Butt splice edges are located under labels

AND
The sensor is triggering on the leading edge of the labels for registration

The sensor is triggered by changes between more and less material. When a splice is present, it adds another set of transitions between more and less material.

Once the sensor triggers on a label, any subsequent transitions to more material are ignored.
After the sensor has triggered on a label edge, it will indicate the end of the label at the next transition to less material. For this reason, detection of leading edges of the labels is unaffected, but the end of the label will be indicated at the trailing edge of the splice. Using the leading edge to control registration assures no effect from splices.

Sample Waveforms


 

LRD6300, LRD8200, LRD6110 and UltraLRD V2

The LRD6300, LRD8200, LRD6100 and UltraLRD V2 measure the total thickness of material in the sensor fork. When the thickness exceeds the trigger point, the sensor indicates a label. Once the trigger point is exceeded, any further increases in thickness do not affect the output.
Splice material will usually exceed this trigger point and cause the sensor to indicate the presence of a label while the splice is present, even if it is in the gap between labels.

Any labels which have leading edges over a splice will not be detected

Sample waveforms:

If the splice is under only one label, the splice will not be detected.

 

© Lion Precision - All Rights Reserved • St. Paul, MN, USA • 800-250-9297 • 651-484-6544 • info@lionprecision.com
Capacitive SensorsEddy-Current Sensors Clear Label SensorsSpindle Error Analysis