Follow: 
TechNotes and White Papers address specific technical issues regarding operation and performance of specific sensor products and may be useful in many different applications.
| Understanding Sensor Resolution Specifications and Effects on Performance [LT05-0010] |  |
 85k |
|
| Comparing Capacitive and Eddy-Current Sensors [LT05-0011] | |
650k |
 |
| Error Sources: Probe/Target Angle [LT03-0010] | |
34k |
|
| Capacitive Displacement Sensor Theory of Operation [LT03-0020] (Whitepaper) | |
150k |
|
| Capacitive Sensors in Vacuum [LT03-0021] | |
46k |
|
| Capacitive Displacement Sensor and Ungrounded Targets [LT03-0022] | |
65k |
4:03 |
| Capacitive Probe Cabling Considerations [LT03-0024] | |
50k |
|
| TARGA III External DAQ Usage [LT03-0026] | |
42k |
|
| Elite Series Phase/Amplitude Frequency Response [LT03-0031] | 65k |
||
| C-LVDT Bandwidth - Response Speed [LT03-0027] | |
184k |
| Customer Supplied Eddy-Current Sensor Targets [LT02-0010] | |
43k |
|
| Minimum Recommended Target Thickness [LT02-0011] | |
43k |
|
| Eddy-Current Probe Cabling Considerations [LT02-0012] | |
50k |
|
| Calibration of Eddy-Current Displacement Sensors [LT02-0013] | |
125k |
|
| ECL101 Master/slave Configuration [LT02-0014] | |
32k |
|
| ThreadSense Probe Centering Errors [LT02-0015] | |
68k |
|
| Eddy-Current Displacement Sensors in Vacuum [LT02-0021] | |
46k |
|
| ECL101 and U3 Probe Phase Response to 80 kHz [LT02-0022] | 190k |
| Comparing Performance of Different Label Sensor Technologies [LT04-0041] | |
900k |
|
| Reducing Costs by Removing Eye-Marks on Label Webs | |
90k |
|
| LRD6110 Setup Instructions [LT04-0030] | 1:41 |
||
| LRD2100 Setup Instructions [LT04-0031] | 1:51 |
||
| Splices and Label Sensors [LT04-0010] | |
87k |
5:00 |
| LRD4100 Mounting Considerations [LT04-0020] | |
48k |
| Probe Mount and Master-Ball Target Details [LT03-0013] | |
80k |
|
| Required Bandwidth to Measure High-Speed Spindles [LT03-0033] | |
450k |
|
| VTEDS File Installation [LT03-0030] | 67k |
||
| SEA Test Template and Instructions [LT03-0014, MS Word] |  180k |
||
| Using the Lathe Adaptor [LT03-0015] | 4:15 |
||
| Masterball Grounding Brush [LT03-0032] | |
100k |
