 |
 |
|
 800-229-6544
• 651-484-6544 • info@lionprecision.com • 563
Shoreview Park Rd. • St. Paul, MN 55126, USA |
||
      |
| Home > Products > Spindle Error Analyzer >Spindle Error Analyzer Software |
 Spindle Error Analyzer How SEA Works Hardware Software Tests Performed FAQ
Representatives
Current Software Version: Spindle Error Analyzer Software Version 8The Spindle Error Analyzer software collects data from the sensors, calculates error motions, and displays the results in polar and linear plots. Up to four test windows can be viewed simultaneously, or any test window can be viewed full screen. The software includes windows for configuration, photos, setup help, and system diagnostics; a complete on-screen help system is also available.
Sensors are read through the data acquisition system; the data is analyzed in real time and presented in a selection of plots: cartesian, polar, or 3-D. The software performs many different tests of error motions in all three axes with up to five channels of displacement measurement and seven channels of temperature measurement.
System Requirements
Spindle and Machine Standards ComplianceThe Spindle Error Analyzer performs tests in compliance with these standards:
SEA 8 Manual SEA Literature
Master Ball Targets Dimensions and Care Using Capacitance Probes to Measure the Limit of Machine Contouring Performance
|
Real time displays can be run while other quadrants display fully analyzed output charts from the current or previous tests. Tests can be archived for later retrieval for comparison. 
