LRD6300 Video

clear label sensor catalogLRD6300 Setup

Get Label Sensor Updates

privacy policy
Speed/Accuracy 4/4
Materials 4/4
Ease of Use 4/4
Low Cost 2/4

LRD6300: Capacitive Label Sensor
for Clear Labels and Paper Labels

 

Capacitive label sensor for virtually every label/liner combination.
One-Click Setup.
Easy to Understand Display.

Learn about Clear Label Sensors, Buy Label Sensors Online

Features down | Setup Video down | Specifications down | Mechanical Specs down

Survey Response

“I used LRD sensors before at a different company and knew it would do what I needed.  Made a believer of the skeptics in my current company.”

 

Usually Ships Same Day

The LRD6300 is the highest performing clear label sensor currently on the market. Its registration accuracy, speed, versatility (including clear labels), and easy to understand graphic setup indicator make it the most popular choice.

Check the label sensor buzz on Storify.com

Be Confident. Try an LRD6300 Without Risk

Be Quick. Keep Your Line Running

Easy, One-Click Setup: Simply remove a label and place the missing label area in the sensor (liner only in the sensor) and hold the "G" (Gap) button down for one second.
Go!
Manual adjustment remains available if you want to adjust it further -YOU are always in control. Watch the setup video down.

Avoid costly "eye-marks" on label webs which are required for optical sensors. Clear label sensors pay for themselves quickly when you stop ordering eye-marks on your labels.

Be Fast and Accurate. Select the Right Label Sensor

LRD6300 Capacitive Label Sensor works reliably with virtually all labels - clear, paper, or metallic. Capacitive technology is the fastest and most accurate.

Easy Push-Button Adjustments

Buttons are easy to push, and the hard-coated polyester overlay means they won't wear or crack for at least 1,000,000 operations. Visual push-button indicator confirms button presses and lets you know if you're out of range.

Label Sensor Over Range Indicator

How Simple Can It Be?

  1. Peel off a label or place a gap in the sensor;
  2. Hold the Gap ("G") button for one second and you're set.

With Easy-Check Verification, a simple glance at the large, bright indicator, even from a distance, assures the operator the sensor is working properly.
Setup is good when there are lights in LABEL area and lights in GAP area.
No tiny, confusing data displays to interpret.

Label Sensor Triple Check Verification

Easy Configuration

Light/Dark Switching indicators make it easy to tell which mode you're in. One press of the L/D button changes the mode.

High Gain

High Gain mode allows you to sense very tiny or thin labels other sensors may struggle with.

Back to Top

LRD6300 Label Sensor Setup - Typical (1:40)

LRD6300 Label Sensor Setup Video - Metallic Labels (2:05)

Ordering:

LRD6300 with attached 2 meter cable: P017-6300
LRD6300C with M12, 4-pin connector: P017-6301
Cable for LRD6300C: 6200-0081

Back to Top

Capacitive Label Sensor Specifications

Life-Cycle Status: Active

Response Time

15 µs

Accuracy

0.002" (0.05 mm)

Switching Frequency

10 kHz

Operating Temp

40°F-140°F
4°C-60°C

Outputs

NPN, PNP Open collector
Environmental Rating IP54

Power In

+11-28 VDC
Short-Circuit and Overload Protection

Mechanical


Download STEP CAD File

label sensor mechanical

Back to Top

 

© Lion Precision - All Rights Reserved • St. Paul, MN, USA • 800-250-9297 • 651-484-6544 • info@lionprecision.com
Capacitive SensorsEddy-Current Sensors Clear Label SensorsSpindle Error Analysis