Ease of Use 2/4
Low Cost 3/4
Features | Setup Video | Specifications | Mechanical Specs
Ships Same Day
The LRD2100 is the original
clear label sensor introduced in 1995. This capacitive label sensor uses a differential sensor configuration for the ultimate in speed, accuracy, and thermal stability. You will have trouble-free performance and rare readjustments provided there is no metallic content in the label materials or label artwork. If a label uses metallic inks or hot stamps, we recommend the LRD6110. Trial Use of LRD Label Sensors
30-Day Guarantee. If the sensor doesn't work for you, you can return it. Over 50,000 LRD label sensors have been selected for pressure sensitive labelers around the world.
Capacitive label sensors are the
best performing. Best tech support and lots of
technical data if you need it. The only clear label sensors with a
two-year warranty. Fewer Label Applicator Headaches
LRD2100 label sensors
rarely require adjustment when changing labels. They only need adjustment when first installed and for unusual labels. Most of the time you can just change label stock and go.
Avoid costly "eye-marks" on label webs which are required for optical sensors. Clear label sensors pay for themselves quickly when you stop ordering eye-marks on your labels. Reduce Future Problems with the Right Sensor
LRD2100 Label Sensor works reliably with clear and paper labels.
For labels with metallic inks or hot stamps
use the LRD6300 or LRD8200.
Available with M12, 5-pin connector or integral cable
Back to Top LRD2100 Setup Video (1:51)
Back to Top LRD2100 Capacitive Label Sensor Specifications
Life-Cycle Status: Active Ordering:
LRD2100 with attached cable: P014-4663
LRD2100C with M12, 5-pin connector: P014-4664
Cable for LRD2100C: 6200-0081
Response Time 20 µs
Accuracy 0.002" (0.05 mm)
Switching Frequency 10 kHz
Operating Temp 40°F-120°F
Outputs NPN, PNP Open collector
Environmental Rating IP54
Power In +11-28 VDC
Short-Circuit and Overload Protection
Back to Top